Now installing Zip HydroTaps: filtered boiling, chilled and sparkling water from one tap.

Hot Water Problems: What They Usually Mean

Recognise the symptom, see what usually causes it, and tell us about it so we arrive with the right parts.

Safe checks only. Check the isolator switch, the safety switch and that the gas is on. Don’t open access panels: electric units run on 240 volts and gas units need a licensed gasfitter.

No hot water at all

Often a repair

Gas units: pilot or ignition fault, or gas supply. Electric: element, thermostat or a tripped circuit. Check the isolator and safety switch first. Then call us; don’t open the panel.

Running out of hot water

Repair or resize

The tank may be too small for the household now, an element or thermostat may have failed, or sediment has built up.

Water leaking from the tank

Usually replace

A leak from the valve can often be fixed. A leak from the base of the tank usually means the tank has corroded through.

Banging, popping or rumbling

Service or replace

Sediment build-up at the bottom of the tank, common in Perth’s harder water areas.

Rusty or discoloured hot water

Anode or replace

If it’s only on the hot tap, the tank or sacrificial anode is likely corroding.

Energy bills creeping up

Worth a review

An ageing or oversized system can cost more to run. A more efficient type may pay for itself.

Two dogs sitting in front of the Neighbourhood Plumbing & Gas van

No hot water? We’ll help get it working again.

No call-out fee. A fixed price before we start. Licensed plumbers and gasfitters across Perth.